Home > News > Content

Metal Hook For Home Impact Strength

Oct 18, 2017

If you put a few household metal hooks on the wall, the situation is quite different.

1, "or when the cooking is too tired when the hand is the time to touch the first time, Metal Hook for home the kitchen looks like a dangerous place!" This problem, because the size is not good.

Everyone's height and operating habits are not the same, so the height of the console, hanging cabinets and other intervals are not too high, so easy to take things, Metal Hook for home it will not touch the head. Hood and cooker at least 75cm distance between the console and hanging cabinet at least 50cm, the height of the console is generally 78-85cm.

2, "why is the ground of the kitchen always wet?" According to the washing - preparation - cooking order, home metal hook placed all kinds of kitchen utensils, Metal Hook for home you can solve this problem.

The position of the kitchen sink is very important, the planning is not good, Metal Hook for home it is easy to splash water, and the location of the sink should be arranged according to individual habits, Metal Hook for home the general order is the washing - preparation - cooking order to set the operation. Conditional, it is best to choose the retaining table, so that will not make the kitchen wet everywhere.

3, "to find something in the kitchen, Metal Hook for home just to rummaging through." By arranging a small object, you can avoid a lot of trouble.

Kitchen tools should be at your fingertips, the washing area can be set up some metal rods or household metal hooks and the like, you can also use the wall and other storage items. Metal Hook for home The sink is not conducive to storage of food, will be more humid, but you can place some cleaning supplies. At the same time you can drawers and lockers together, so that both can store items, and beautiful, cooking mood is very good.

household metal hook is a semi-crystalline material. It is harder than PE and has a higher melting point. Since the homopolymer type PP temperature is higher than 0C is very brittle when many commercial PP household metal hook material is added 1 ~ 4% ethylene random copolymer or higher ratio of ethylene content of the clamp copolymer. Polymeric PP material has a low thermal distortion temperature (100 ℃), Metal Hook for home low transparency, low gloss, low rigidity, but has a stronger impact strength. The strength of PP increases with increasing ethylene content. PP Vicat softening temperature of 150C. Due to the high crystallinity, Metal Hook for home the surface stiffness and scratch resistance of this material are excellent. PP does not exist environmental stress cracking problem. In general, PP is modified by the addition of glass fibers, metal additives or thermoplastic rubbers. PP flow rate MFR in the range of 1 to 40. Low MFR PP material has better impact resistance but lower ductility. For the same MFR material, the copolymer type has a higher strength than the homopolymer type. Metal Hook for home As a result of crystallization, PP shrinkage is quite high, generally 1.8 to 2.5%. And the direction of the uniformity of shrinkage than PE-HD and other materials much better. Adding 30% of the glass additive reduced the shrinkage to 0.7%. Homopolymer and copolymer type PP household metal hook material has excellent resistance to moisture, acid and alkali corrosion resistance, anti-solubility. However, Metal Hook for home it has no resistance to aromatic hydrocarbons (such as benzene) solvents, chlorinated hydrocarbons (carbon tetrachloride) solvents and so on. PP is not like PE as at high temperatures still have antioxidant properties.